DCS ADR48 Installation Guide download pdf (Page 10)

All parts of the Professional Access Drawers can be cleaned with hot soapy water, rinsed, dried and buffed to a shine

with a soft, heavy cloth. Always try this first, as it is the mildest cleaning procedure.

1. Use the mildest cleaning procedure first. Some brands of cleaners of the same type are harsher than others, read

their directions. A scent or a propellant can make a difference in the product, read the ingredients. Try on a small

area first.

2. To avoid marring the surface always rub metal finishes in the direction of the stainless steel polish lines (grain). The

cleaner will be more effective when used in the direction of the polish lines.

3. Use only clean sponges, soft cloths, paper towels, plastic non-metal soap pads for cleaning or scouring as

recommended in this section. (Use only soap pads with soap still in them. An empty pad can scratch.)

4. Be sure to rinse all parts thoroughly and to wipe dry to avoid water marks.

BRAND NAME CLEANERS

In this section on cleaning, the use of name brands is intended only to indicate a type of cleaner. This does not

constitute an endorsement. The omission of any name brand cleaner does not imply its adequacy or inadequacy.

Many products are regional in distribution and can be found in local markets and department stores.

MAINTENANCE

After cleaning, use a stainless steel polish, such as Stainless Steel

Magic® applied to the drawer and handle surfaces.

To maintain the smooth operation of the drawers, spray the

bearing areas with silicone spray lubricant annually .

(Fig. 17).

FREEZER PACK (OPTIONAL, KIT #70696A)

Proper Handling:

1. Place freezer pack in freezer, lay it flat.

2. Freeze overnight or a minimum of 8 hours.

3. Place frozen Freezer Pack in the steel tray on the second shelf, in

appropriate cavity of Access Drawer (Fig. 18).

The Freezer Pack is dishwasher safe. Or wash with warm soapy

water, rinse and air dry. Store flat in dry storage or in freezer.

Fig. 17

Lubrication points

(Use silicone spray

annually)

CARE & MAINTENANCE

Freezer Pak (optional)

Kit # 70696A

. 18

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

No comments

DCS ADR48 Installation Guide Page 10