DCS CPV-366 Installation Guide download pdf (Page 15)

CABINET PREPARATION

6. Cut the openings for the following installation:

■ Standard counter top installation, see Fig. 6A

■ Deep counter or island installation, see Fig. 6B

NOTE:

The sides or bottom of the opening may be solid combustible or non-combustible material. If the bottom is solid,

provide a 6” x 6” cutout in the left rear corner for the gas inlet and power cord clearance. See Fig. 4.

Fig. 3

Flush with cabinets

Front projects outward as shown

from standard depth cabinet.

Front flush with cabinets; a minimum

of 25

3/4"

cabinet depth required

Front flush with cabinets; a minimum of 26-1/2”

cabinet depth required

Front projects outward as shown

from standard depth cabinet.

Flush with cabinets

Fig. 4

6”

Cutout

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

No comments

DCS CPV-366 Installation Guide Page 15