DCS CT-365BK Installation Manual download pdf (Page 8)

COOKTOP USE

ELECTRONIC IGNITERS:

If a burner does not re-ignite, listen for the clicking sound. If the igniter is not clicking, turn off the

burner. Check the circuit panel for a blown fuse or a tripped circuit breaker.

BURNER EFFICIENCY:

It is necessary to keep the burner ports and the igniters clean for proper lighting and efficient performance.

The burner flame should burn completely around the burner with no excessive noise or lifting. The

flame should be blue in color and stable with no yellow tips.

FLAME HEIGHT:

The correct height of the flame mainly depends on the size of the bottom of the cooking utensil, the

material of the cooking utensil, the amount and type of food and the amount of liquid in the utensil.

Following are some basic rules for selecting flame height.

 For safety reasons the flame must never extend

beyond the bottom of the cooking utensil.

 Never allow flames to curl up the side of the pan.

 Utensils which conduct heat slowly (such as glass-

ceramic) should be used with medium to low flames.

If you are cooking with a large amount of liquid a

slightly larger flame can be used.

BURNER GRATES:

The cast iron burner grates are fully porcelain coated for long

life and rust prevention. Hi-Temperature cushions allow the

grate to rest softly on the cooktop without scratching. The

grates are designed for easy sliding of pots across the grate

tops. They were designed in interlocking sections to make

them safer, easier to remove and clean. For additional

cleaning tips see the care and cleaning section.

BURNER MAX. LOW SIMMER

LOCATION Btu/hr Btu/hr Btu/hr

NAT LP NAT & LP NAT & LP

1,2,4,5 11,000 10,000 3,000 1,200

3 17,500 15,000 3,000 1,200

Cabinet front

PROPER FLAME HEIGHT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No comments

DCS CT-365BK Installation Manual Page 8