DCS BGS-1248 Installation Guide Page 1

THE PROFESSIONAL RGT SERIESGAS RANGEInstallation GuideMODELS: RGT-305RGT-366RGT-364GLRGT-364GDRGT-484GGRGT-486GLRGT-486GDRGT-485GD

PLANNING THE INSTALLATION8IMPORTANT INSTALLATION INFORMATIONThe RGT is tested in accordance with ANSI Z21.1 Standard for Household Cooking Gas Applian

9PLANNING THE INSTALLATIONRECOMMENDED INSTALLATION INSTRUCTIONInstall components in the following order:A. Vent HoodB. Backguard System (sold separate

10UNPACKING AND HANDLINGMOVING AND PLACING THE RANGE (cont.)Electric and gas connections should be made before therange is slid into the cabinet openi

11UNPACKING AND HANDLINGGRIDDLE AND GRILL LEVEL ADJUSTMENTSThe grill and griddle sections (if equipped) are fastenedin place at the front with screws.

12VENTILATION REQUIREMENTSA suitable exhaust hood must be installed above the range. The following chart indicates the minimum blowercapacity recomme

13INSTALLING ANTI-TIP DEVICEAll ranges must have an anti-tip device correctlyinstalled as per the following instructions. If you pullthe range out fr

14CABINET PREPARATION1. The range is a free standing unit. If the unit is to be placed adjacent to cabinets, the clearances shown in fig. 10(RGT-36 &

15CABINET PREPARATIONCAUTION:36" min. tocombustiblematerial #,from cookingsurface35-3/8" max. for level counter,36-3/4" max. with range

0” ClearanceCJI0” ClearanceBAFCHEDG36" Min. toCombustibles #12" Min. toCombustibles #without backguard#As defined in the “National Fuel Gas C

ELECTRICAL CONNECTIONS17ELECTRICAL CONNECTIONS Power Requirements Range: 120 VAC, 60 Hz., single phase RGT-305: 4 Amp. Max. RGT-36: 7 Amp. Max. RGT-

18NOTE: The flex line for the gas supply must be metal and beapproved by an approved certifying agency (AGA, CGA, orUL). Never use a hose made of ru

19TEST AND ADJUSTMENTSWARNING : For warranty coverage, DCS requires that burner adjustments be made by aqualified technician at the time of installat

20CLEANING EXTERIOR SURFACESTEST AND ADJUSTMENTSThe stainless steel surfaces may be cleaned by wiping with a damp soapy cloth or sponge. Any liquid s

21INSTALLER FINAL CHECKLISTGENERAL❑Placement of unit.❑Specified clearance maintained to cabinet surfaces.❑Unit Level - front to back, side to side.❑Al

22HOW TO OBTAIN SERVICEFor warranty service, please contact DCS Customer Care Representative at (888) 936-7872. Before you call,please have the follo

23WARRANTYLIMITED WARRANTYWhen you purchase a new DCS Range you automatically receive a One Year Limited Warranty covering parts andlabor for the enti

24B. Defects caused by factors other than:1. Normal domestic use or2. Use in accordance with the Product’s Use & Care Guide.C. Defects to the Pr

Fisher & Paykel Appliances, Inc.5900 Skylab Road, Huntington Beach, CA 92647 Customer Care: 888.936.7872 Fax: 714.372.7003 www.dcsappliances.

A MESSAGE TO OUR CUSTOMERS1Thank you for selecting this professional gas Range. Because of this appliance’s unique features we havedeveloped this Inst

2TABLE OF CONTENTSINTRODUCTION 3SAFETY PRACTICES AND PRECAUTIONS 4-6MODELS 7PLANNING THE INSTALLATION 8-9UNPACKING AND HANDLING 9-11VENTILATION REQUIR

3INTRODUCTIONThe DCS RGT series ranges are designed with a large number of features available in a multitude of differentcombinations. Patented Dual F

4SAFETY PRACTICES AND PRECAUTIONSWhen properly cared for, your new DCS Appliance has been designed to be a safe, reliable cooking appliance.When using

5SAFETY PRACTICES AND PRECAUTIONS For personal safety, wear proper apparel. Loose fitting garments or hanging sleeves should never be worn whileusing

6SAFETY PRACTICES AND PRECAUTIONS Clean the cooktop with caution. Avoid steam burns; do not use a wet sponge or cloth to clean the cooktopwhile it is

MODELS748” RGT RANGE MODELSRGT-484GG36” RGT RANGE MODELSRGT-36630” RGT RANGE MODELSRGT-305OVENONHEATINGDOOR LOCKEDHEATINGRGT-486GL RGT-486GDRGT-485GDR