DCS RF15I Installation Guide download pdf (Page 6)

UNpACkiNG yOUR iCE MAkER

REMOvE pACkAGiNG

Your ice maker has been packed for shipment with all parts that could be damaged by movement securely fastened. Before

using, be sure all packing materials and tape have been removed.

iMpORTANT

Keep your carton packaging until your ice maker has been thoroughly inspected and found to be in good condi-

tion. If there is damage, the packaging will be needed as proof of damage in transit.

NOTE: Inspect the product to verify that there is no shipping damage. If any damage is detected, call the shipper and initiate

a damage claim. DCS by Fisher & Paykel is not responsible for shipping damage.

DO NOT discard any packing material (box, pallet, straps) until the unit has been inspected.

SpECiFiCATiONS

Exterior Cabinet Dimensions:

Height 34-1/4” min.

Width 14-7/8”

Depth 21-1/2”

Shipping Weight: 100 lbs.

Electrical Requirements: 115VAC/60 Hz

You need to have the

following materials for

proper installation: 1/4” OD copper tubing,

shut-off valve and 5/8” ID rubber drain tube

Water supply: 1/4” OD copper tubing (subject to local codes), 20-100 PSI. For water connection, allow 2”

behind the unit.

Drain: 5/8” ID rubber tube (subject to local codes). Unit must drain into a 1-1/2” ID minimum stand

pipe.

Drain Pump (optional): RF15I-P

Ice Capacity: up to 35 lbs. per day (75

F ambient)

14-7/8”

34-1/4” min.

21-1/2”

Fig. 01

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

No comments

DCS RF15I Installation Guide Page 6