DCS WR24RTD User Manual download pdf

WRAPPER FOR FREE STANDING OUTDOOR BEER

DISPENSER, REFRIGERATOR & REFRIGERATED DRAWERS

INSTALLATION INSTRUCTIONS

Before you begin, read these instructions completely and carefully.

Getting Started

Remove packaging and retain until installation is complete.

CAUTION:

The surface on which the grill cart and refrigerated unit is located must be at and level.

Note: Wrapper must be installed on the refrigerated unit and attached to the grill cart before the grill

head is installed on the cart.

WARNING!

Some parts have sharp edges; care must be taken when handling the various components to

avoid injury. Please read safety information provided in these instructions before beginning

assembly. Wear gloves when handling.

Tools Required

Phillips Screwdriver

5/16 Socket and 5/16 Wrench

Safety Glasses

Work Gloves

Contents

Part Description Qty

Back Panel 1

Side Panels (right and left)

Top Riser

Male Strike Catch Clips (pre-attached)

Female Strike Catch Clips (pre-attached)

Hardware Kit Includes:

Protective Grommet

MS 10-24 X 1-1/8 PH PAN HD SS

SM 10-24 X 1/2 PH PAN TY F SS

Hex Blt 1/4-20 X 1/2 Full TH SS

Nut Hex 1/4-20 KEPS SS

Installation Instructions

Assembly instructions for Freestanding application:

Loosen (2) front bottom grill screws (Fig. 01) approx. 1.

1/8”. (No need to remove screws.)

Remove (2) top outer corner screws on back panel of 2.

refrigerated unit (Fig. 02). (Retain screw for re-use.)

Place the left side panel on the unit by sliding the 3.

front ange behind the bottom grill plate (Fig.03).

Then lift the rear of the panel so the screw holes

are visible in the slotted holes of panel, re-install

top screw and lower screw (Fig. 04 and 05)

(10-24 X 1/2 Hex Head SS - lower screws are

provided with hardware kit). Do not tighten at this

point.

Fig. 02

Screws

Screw

Right panel

Back panel

Top riser

Left panel

Fig. 01

Screws

1 2 3 4

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

1WRAPPER FOR FREE STANDING OUTDOOR BEER DISPENSER, REFRIGERATOR & REFRIGERATED DRAWERSINSTALLATION INSTRUCTIONSBefore you begin, read these instru

Page 2 - CAD cart):

2Repeat Steps 2 and 3 for the other side panel. 4. Place both top risers on top of unit as shown in (Fig. 07). 5. Using screws provided (10-24 X 1-1/8

Page 3

3Remove top and bottom outer corner screws on back panel of refrigerated unit 2. (Fig. 11). (Retain screw for re-use.) With the grill head out of the

Page 4 - ADD HOLE

For optional type and colors of the Solid Surface, contact your local manufacturer and provide drawing in Fig. 15.Attaching side shelf - Optional Acce

DCS WR24RTD User Manual

Browse online or download User Manual for Unknown DCS WR24RTD. DCS WR24RTD Wrapper Refir Tap Drawer [it]

Summary of Contents

More documents for Unknown DCS WR24RTD

Comments to this Manuals

DCS WR24RTD User Manual

Browse online or download User Manual for Unknown DCS WR24RTD. DCS WR24RTD Wrapper Refir Tap Drawer [it]

Summary of Contents

More documents for Unknown DCS WR24RTD

Comments to this Manuals

Related products and manuals for Unknown DCS WR24RTD