DCS CT-365BK Installation Manual download pdf (Page 7)

COOKTOP USE

CAUTION:

For warranty coverage, DCS requires that burner adjustments be made by a

qualified technician at the time of installation. Extreme care should be used

when adjustments are made after installation. Improper or lack of

adjustments will void your warranty.

CONTROL KNOBS:

The control knobs and knob bezels are readily associated with the burners they control and are

located on the right hand side of the Cooktop. The sealed top burners have an infinite number of heat

settings and there are no fixed positions on the control knobs between HI and SIM (with the exception

of LOW.) To light the burner push control knob in and rotate counterclockwise. An audible clicking

sound will be heard and the burner should light immediately. To use, turn the knob to the desired

setting.

COOKING UTENSILS:

For best results we recommend using Professional Cookware. These

can be found at your finer department stores,specialty cooking shops,

or restaurant supply stores. If using regular cookware be very careful if

the pans have plastic handles, as these large professional size burners

can flame up on the outside of the pan and melt or bubble the

handles.

TOP VIEW OF KNOB BEZEL

THESE GRAPHICS

SHOW BURNER

LOCATION:

LEFT REAR BURNER

“ON”

INDICATOR

LIGHT

BURNERS:

Your new Drop-In Cooktop is equipped with

burners typical of those used in restaurants. These

restaurant style burners are comprised of high

strength die cast aluminum burner bases and

simmer port rings, precision forged brass port

rings, and cast iron burner caps.

Your cooktop is equipped with 4 burners rated at

11,000 Btu/hr, and one HI-output burner rated at

17,500 Btu/hr. Your new Drop-In Cooktop has

exceptionally low simmer capabilities. (See chart

on page 7.) The burner system is designed for

maximum cleanability and control. All the cooktop

burners have electronic spark re-ignition to

eliminate continuously burning pilots, if the flame

is blown out, it will relight.

Cap

Brass

Port

Ring

Simmer

Ring

Hex Nut

Base

Brass Port

Ring

Locating

Notch

Locating

Pin Hole

Inside

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

DCS CT-365BK Installation Manual Page 7

Comments to this Manuals

Related products and manuals for Cookers DCS CT-365BK