DCS CT-365BK Service Manual download pdf (Page 2)

G2

www.cabac.com.au | sales@cabac.com.au

Cable Ties - Nylon Polyamide 66

Our ties meet most basic cable tie needs, with

choices covering a wide range of requirements

for size and strength. One-piece, injection-

moulded construction provides maximum

strength and adjustability for securing all sizes

of bundles. Extra features such as rounded

edges and bent-tip design make installation

easy, fast, accurate and secure. Installation

tools are not required but are suggested

where controlled, uniform tension and cut-off

applications are desired.

Split mandrel, loop tensile strength tests show

that the most vulnerable stress point for a

nylon cable tie is its pawl. There is a trade-off

between insertion/pull-up ease and strength of

a cable tie. The stronger the pawl, the more

force is required to insert and pull up the

strap as it engages the pawl teeth. Cable

ties are designed to optimise insertion

ease and still meet or exceed all applicable

strength requirements. This magniﬁed cross-

section illustrates our full four-tooth locking

engagement between strap and pawl under

load. This intimate contact between pawl and

strap teeth, ensures that the strength of the

pawl is fully utilised.

Installations under conditions of full tropical

sun and/or very low relative humidity, must

be referred to CABAC design engineers for

evaluation and recommendations.

Exterior applications should use black

(U.V. stabilised) ties.

Smooth, rounded edges do not

cut insulation – or hands – and

are comfortable to work with.

Closely spaced position-locking

teeth permit ﬁne adjustment to

tie bundles of all sizes.

No metal parts; head and pawl

are integrally moulded for

added strength and durability.

Bent tip on all CT Series cable

ties allows easier pick-up,

insertion and pull-up.

V-shaped raised ridges

on bent tip give a

sure grip and easier

pull-up.

Self-locking, one-piece, low-

proﬁle head conserves space.

Technical Data

Conformant Standards

UL; Mil Spec; IEC; VDE; DIN

Refer

MS 3367 MS 3368-physical dimensions

Mil-S-23190E - testing

Mil-Std-105D - sampling

Mil-C-45662 - test equipment calibration

Mil-1-45208A - QC manual and systems

Smoke Emission

Low smoke / Halogen free

Material

NATURAL - Nylon 66 with additives

BLACK - Nylon 66 with UV stabilisers

Material Tensile Strength

80 N/mm

2

or 11200 psi

Electrical data

Breakdown voltage 20 kV/mm

Volume resistivity 2 x 10

10

ohm cm

Moisture content 2.5% w.v. @ 23%/50%RH

Operating Temperature

-40°C to 85°C

Flammability

Passed - U.L. 94V-2

UV Stability

Exceeds ASTM-D-4066 with 2.5% carbon black

giving nominal 15 years normal exposure to UV

with less than 10% yield in tensile strength.

CABLE TIES - NYLON POLYAMIDE 66

HALOGEN FREE

Multi Toothed Pawl

1 2 3 4 5 6 7 ... 27 28

Comments to this Manuals

No comments