G21
Phone: 133 122 | Fax: 1300 303 310
Heatshrink & Duct Tape
Heatshrink Tape
HST20 Heatshrink Tape is a thin irradiated polyolefin tape that shrinks
and amalgamates, forming a ridged seal on complex shapes. It is ideal
for the repair of damaged cables, forming T-joints and junctions, and
sealing complex shapes.
• Excellent for creating a waterproof seal on complex shapes
• High mechanical strength and rigid once shrunk
• Low water absorption
• Excellent chemical resistance
• Irradiated polyolefin which shrinks and amalgamates above 130˚C
• Becomes continuous insulation with variable wall thickness
• Operating temperature -55˚C to 105˚C
• Standard roll 50m x 20mm
To apply HST20, wind the tape loosely with about a two-thirds overlap,
three layers at a time. After every three layers shrink the tape and
then apply another three layers. Repeat this process until the desired
insulation thickness is reached. The tape amalgamates during the
shrinkage process.
HST20
After
Before
Technical Data
Conformant Standards EC, VDE DIN
Material Irradiated polyolefin
Colour Black
Size Roll 50m x 20mm (approx. thickness 0.1mm)
Temperature Storage: up to 90°C / Operating: -55°C to +105°C
Shrinkage Temperature Above 130°C
Tensile Strength 0.5 kg/mm
2
Elongation at breaking point 250%
Breakdown Voltage 30 kV/mm thickness
Volume Resistivity Above 1 x 10
15
ohm cm
Water Absorption 0.1%
UV Resistance General UV stabilised
Duct Tape
A handy tape with a high adhesion, which can be used for many
different things.
• To tape air-conditioning ducts
• A wide insulation tape
• A packing tape
Supplied individually in 30m rolls 48mm wide in grey or black.
DT48 - Grey
DT48BK - Black
HEATSHRINK & DUCT TAPE
Comments to this Manuals