DCS CT-365BK Service Manual download pdf (Page 20)

G20

www.cabac.com.au | sales@cabac.com.au

Self - Amalgamating Tapes

SAT1 Self-Amalgamating Tape

SAT1 Self-Amalgamating Tape is a highly adhesive synthetic rubber and

resin based tape that ‘cures’ to a single mass once it is taped.

Available in black or red.

• Ideal for sealing, waterprooﬁng and insulating

• Highly resistant to hostile environments

• For high mechanical strength use SAT2

• SAT1RD is ideal for phase colouring and will not degrade or unwrap

When using SAT1, remove the separator and gently stretch sufﬁciently to reduce

its width by 4-5mm, and wrap with a 50% overlap. Ensure no air is trapped

in the wrapping process. In cold weather warm to room temperature.

SAT1 Black 20mm x 5m

SAT1/40MM Black 40mm x 5m

SAT1-RD Red 20mm x 15m

Technical Data

Conformant Standards

UL, NEMA, IEC, JIS

Material

Resin impregnated synthetic

rubber with separator paper

Colour

Black/Red

Size

Black 5m x 20mm

Black 5m x 40mm

Red 15m x 20mm

Thickness

Adhesive Layer 0.1mm

Main layer 1.0mm

Separator Layer 0.18

Temperature

Storage up to 50°C

Operating 45°C to 95°C

Tensile Strength

0.02 kg/mm

Elongation at Breaking Point

Above 400%

Breakdown Voltage

9 kV/mm thickness

Volume Resistivity

Above 1 x 10

ohm cm

Water Absorption

Less than 0.05%

UV Resistance

Exceeds ISO 1408

SAT2 High Mechanical Strength

SAT2 is a synthetic rubber and resin self-amalgamating tape with a polyethylene separator that

forms part of the joint, giving it high mechanical strength.

• Ideal for rugged environments

• Waterproof, especially if used in conjunction with SAT1

• Excellent electrical and ageing properties

When using SAT2, wrap with a 50% overlap with the adhesive side in, and gently stretch so that it

closely adheres to the cable. The polyethylene separator forms part of the joint, and as a guide the

tape should reduce in width by 1-2 mm when applied. In cold weather warm to room temperature.

SAT2

Technical Data

Conformant Standards

UL, NEMA, IEC, JIS

Material

Resin impregnated synthetic

rubber with polythene ﬁlm

separating layer

Colour

Black

Dimensions

Roll 5m x 20mm

Thickness

Adhesive layer 0.38mm

Main layer 0.50mm

Poly separator 0.12mm

Temperature

Storage up to 50°C

Operating -45°C to +105°C

Tensile Strength

0.02 kg/mm

Elongation at Breaking Point

Above 350%

Breakdown Voltage

6 kV/mm thickness

Volume Resistivity

Above 1 x 10

ohm cm

Water Absorption

Less than 0.05%

UV Resistance

Exceeds ISO 1408

SELF - AMALGAMATING TAPES

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

DCS CT-365BK Service Manual Page 20

Comments to this Manuals

Related products and manuals for Cookers DCS CT-365BK