DCS ADR24 Operations Instructions download pdf (Page 45)

VEGASON 51P … 53P 45

Setup

The adjustment program VEGA Visual Ope-

rating (VVO), called in the following VVO,

gets into contact with the connected sensor

…

… and asks in which mode the adjustment

software should be used. After a few sec-

onds, the software indicates if and with which

system a connection exists.

If the following message is displayed, you

have to change the communication settings in

VVO.

• Then click to " “, point to "

“ and click to " “.

• First click to " “.

Then choose the Profibus card which is

installed in your PC.

The window for the bus communication ad-

justments opens. Ten is preadjusted as ad-

dress for the Master-Class 2 interface card. If

participant number 10 is free in your bus, you

can accept address 10. Typical values of the

bus parameters have been preset. At this

point, you should adjust the communication

parameters that apply to your system.

• Now click to " “.

The message "

VVO will shut down and Win-

dows

must be restarted

“ appears.

Note: As a rule, a Windows

restart is not

necessary.

• Now start VVO (restart).

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 83 84

No comments

DCS ADR24 Operations Instructions Page 45