DCS RX215PJX1 User's Guide download pdf (Page 31)

Troubleshooting

If there is a problem with your appliance, please check the following points before contacting your

local DCS Authorized Service Agency or DCS Customer Care Representative.

Problem Possible causes What to do

Freezer control and

lights are on, but

compressor is not

operating.

Refrigerator is in defrost

mode.

Normal operation.

Wait 40 minutes to see if refrigerator restarts.

Temperature-

controlled drawers

are too warm.

Control settings are not

right.

See page 11 to adjust controls.

Freezer controls are not

right.

See page 11 to adjust controls.

Drawer is improperly

positioned.

See pages 12 – 14 to verify drawer

positioning.

Refrigerator does

not operate.

Refrigerator is not plugged

in.

Plug in refrigerator.

Touch temperature

controls are set to off.

See page 11 to adjust controls.

Fuse is blown, or circuit

breaker needs to be reset.

Replace any blown fuses.

Check circuit breaker and reset, if necessary.

Power outage has

occurred.

Call local power company listing to report

outage.

Refrigerator is

malfunctioning.

Unplug refrigerator and transfer food to

another refrigerator. If another refrigerator is

not available, place dry ice in freezer section

to preserve food. Warranty does not cover

food loss. Contact service agent (see page 36).

Food temperature

is too cold.

Condenser coils are dirty. Clean according to the chart on page 23.

Refrigerator or freezer

controls are set too cold.

See page 11 to adjust controls.

Food is too close to upper

left air inlet.

Relocate food away from upper left corner.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 76 77

Comments to this Manuals

No comments

DCS RX215PJX1 User's Guide Page 31

Comments to this Manuals