DCS RF24D Installation Guide download pdf (Page 13)

MOVING OR STORING YOUR REFRIGERATED DRAWER

If your refrigerated drawer is turned off for any reason, wait 10 minutes before turning it back on. This will allow

the refrigeration system pressures to equalize before restarting.

MOVING YOUR REFRIGERATED DRAWER

■ Turn off the appliance and unplug from the power point. Remove all food.

■ Retract the adjustable feet in as far as they will turn (see page 4, Stability).

■ Ease the refrigerated drawer out of its position. Tuck the power cord away and tape the drawers closed. Tape the

storage containers in place. If the cabinet needs to be placed at an angle or laid down, carefully lay it on its side

(the right hand side when viewed from the front).

■ Always transport in its upright position only.

■ Relocate and install. If the appliance has been left on its side for any length of time, leave it standing upright

for at least 12 hours before turning on.

STORING YOUR REFRIGERATED DRAWER

■ When storing your cleaned appliance, leave the drawers open. This allows air to circulate and prevents the

build up of bacteria and molds.

■ Before using again, clean well using a mixture of warm water and baking soda (add 1 teaspoon of baking soda

o each 1 pint [500 ml] of water). Rinse with clean water.

VACATION TIME

■ We recommend you leave your refrigerated drawer protected from all weather and operating while you are on

vacation. It will prevent mold and odors from building up.

CAUTION!

Never transport a refrigerated drawer on it back or side for any distance. This may damage the cooling components.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

DCS RF24D Installation Guide Page 13