DCS WDU models Specifications download pdf (Page 10)

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

3.1. Definitions

The following syntactical definitions apply:

<CR> Carriage return character, is the command line and result code terminator

character, which value, in decimal ASCII between 0 and 255,is specified within

parameter S3

. The default value is 13.

<LF> Linefeed character, is the character recognised as line feed character. Its

value, in decimal ASCII between 0 and 255, is specified within parameter S4

The default value is 10. The line feed character is output after carriage return

character if verbose result codes are used (V

1 option used ) otherwise, if

numeric format result codes are used (V

0 option used) it will not appear in the

result codes.

<...> Name enclosed in angle brackets is a syntactical element. They do not appear

in the command line.

[...] Optional subparameter of a command or an optional part of TA information

response is enclosed in square brackets. Brackets themselves do not appear

in the command line. When subparameter is not given in AT commands which

have a Read command, new value equals to its previous value. In AT

commands which do not store the values of any of their subparameters, and

so have not a Read command, which are called

action type

commands, action

should be done on the basis of the recommended default setting of the

subparameter.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 317 318

No comments

DCS WDU models Specifications Page 10