DCS WDU models Specifications download pdf (Page 140)

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

+CGSMS – Select service for MO SMS messages

<service> -a numeric parameter which indicates the service or service pref

erence to be used.

0 – Packet Domain

1 - Circuit switched (factory default)

2 – Packet Domain preferred (use circuit switched if GRPS is not available)

3 - Circuit switched preferred (use Packet Domain if circuit switched not ava

ilable)

Note: If SMS transfer via Packet Domain fails, <service> parameter are auto

matically reset to Circuit switched.

AT+CGSMS? Read command reports the currently selected service or service preferenc

e :

+CGSMS: <service>

AT+CGSMS=? Test command reports the supported range of values for parameter

Reference 3GPP TS 27.007

3.5.5.2.3. Set Text Mode Parameters - +CSMP

+CSMP - Set Text Mode Parameters

AT+CSMP=

[<fo>

[,<vp>

[,<pid>

[,<dcs>]]]]

Set command is used to select values for additional parameters for storing

and sending SMs when the text mode is used (AT+CMGF=1)

Parameters:

<fo> - depending on the command or result code:

first octet of 3GPP TS 03.40/23.040 SMS-DELIVER, SMS-SUBMIT

(default 17), SMS-STATUS-REPORT, or SMS-COMMAND (default 2) in

integer format.

<vp> - depending on SMS-SUBMIT <fo> setting:

3GPP TS 03.40/23.040 TP-Validity-Period either in integer format

(default 167) or in quoted time-string format

<pid> - 3GPP TS 03.40/23.040 TP-Protocol-Identifier in integer format.

<dcs> - depending on the command or result code:

3GPP TS 03.38/23.038 SMS Data Coding Scheme (default 0), or Cell

Broadcast Data Coding

Scheme

Note: the current settings are stored through +CSAS

AT+CSMP? Read command reports the current setting in the format:

+CSMP: < fo>,<vp>,<pid>,<dcs>

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 317 318

No comments

DCS WDU models Specifications Page 140