DCS WDU models Specifications download pdf (Page 240)

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

3.5.7.1.100. GCF Flag Set

#GCFS – GCF Flag Set

AT#GCFS=

[<mode>,

<value>

Set command sets the GCF parameters values.

Parameters:

<mode> - parameter type

0 – Reset of all parameter

1 – GCF flag

2 – SIM protocol

<value> - parameter setting value

GCF flag :

0 – GCF mode disable(default)

1 – GCF mode enable

SIM protocol

GSM protocol

USIM protocol(default)

Note1:

GCF mode enable

- RRM and ETSI conformance test case

SIM protocol

- IT3 GSM test case must set GSM protocol.

Note2:

#GCFS=0 command set default mode.

AT#GCFS? Read command reports the socket parameters values, in the format:

#GCFS: <GCF flag value>,<SIM protocol value>

AT#GCFS=? Test command returns the allowed values for the parameters.

Note

This command is not supported in UC864-G AT&T.

3.5.7.1.101. Extended Reset - #Z

#Z - Extended reset

AT#Z=<profile>

Set command loads both base section and extended section of the

specified user profile stored with AT&P.

Parameter

0 – user profile 0

1 – user profile 1

AT#Z=?

Test command tests for command existence.

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 317 318

No comments

DCS WDU models Specifications Page 240